Enclosed manualinside of box
这里可以自定义设置
01.
Fangpusun SolarixPR Solar Charge Contoller
The Fangpusun PR 10-30 series of charge controllers is the highlight in the range.The latest charging technologies, com bined with a Fangpusun AtonlC state of charge determination which has been significantly improved once again. result in optimal battery maintenance and control of the module output of up to 900 Wp which can be connected to it. A large display informs the user about all operating modes with the aid of sym bols. The state of charge is represented visually in the form of a tank display.Datasuch as voltage,current and state of charge can also be displayed digitally as figures on the display. In addition, the controller has an energy meter which can be reset by the user.
Product features
→ Hybrid controller
→ State of charge determination with Fangpusun AtonlC(SOC)
→ Automatic detection of voltage
→ PWM control
→ Multistage charging technology
→ Load disconnection depending on SOC
→ Automaticload reconnection
→ Temperature compensation
→ Common positive grounding or negative grounding on one teminal
→ Integrated data logger
→ Night light function
→ Integrated self test
→ Monthly maintenance charge
Electronic protection functions
→ Electronic protection functions
→ Overcharge protection
→ Deep discharge protection
→ Reverse polarity protection of load, module and battery
→ Automaticelectronicfuse
→ Short circuit protection of load and module
→ Overvoltage protection at module input
→ Open circuit protection without battery
→ Reverse current protection at night
→ Overtemperature and overload protection
→ Battery over voltage shutdown
Display
→ Graphical LCD display for operating parameters,fault messages,self test
.
Operation
→ Simple menu-driven operation
→ Programming by buttons
→ Manual load switch
Options
→ Prepayment interface
→ External temperature sensor
→ Alarm contact
Options
The Fangpusun PR 10-30 series of charge controllers is the highlight in the range.
| PR 1010 | PR 1515 | PR 2020 | PR 3030 | |
| Characterisation of the operating performance | ||||
| System voltage | 12V(24 V) | |||
| Own consumption | 12 mA | |||
| DC input side | ||||
| Open circuit voltage solar module | < 47V | |||
| Module current | 10 A | 15 A | 20 A | 30 A |
| DC output side | ||||
| Load current | 10 A | 15 A | 20 A | 30 A |
| End of charge voltage | liquid 13.9V(27.8V);gel 14.1V(28.2V) | |||
| Boost charge voltage | 14.4V(28.8V) | |||
| Equalisation charge | 14.7V(29.4V) | |||
| Reconnection voltage (SOC/LVR) | >50%/12.6V(25.2V） | |||
| Deep discharge protection (SOC/LVD) | <30%/11.1V(22.2V） | |||
| Operating conditions | ||||
| Ambient temperature | -10℃...+50℃ | |||
| Fitting and construction | ||||
| Terminal (fine/single wire) | 16mm²/25mm²-AWG6/4 | |||
| Degree of protection | IP 32 | |||
| Dimensions(X×Y×Z) | 187×95×44 mm | |||
| Weight | 350 g | |||
| Technical data at 25℃/77°F | ||||
Copyright © 2021 Wenzhou Xihe Electric Co., LTD| All Rights Reserved
Product Message